High air capacity effluent roots blower
Basic Info
Model No.: HLSR65
Product Description
Product Description
ETP/ Wastewater Project Roots Air Blower .Roots blowers are one of the essential equipment for sewage treatment. During the process, blowers determine the effect and energy consumption. In biological waste water treatment plants, aeration tanks are built to remove organic matter from the water. Microorganism growth will be promoted by oxygenation in aeration tank. Microorganisms can efficiently and successfully break down organic content. Hence, roots blower conveys air to tanks and supply oxygen to microorganisms.
1.Good Air Volume And Pressure:The impellers of roots blower adopt new-style shape curve,through the optimized design to improve heat-insulation as well as volumetric efficiency.Therefore,the product has excellent air flow rate and higher pressure.
2.Lower Noise and Vibration Level:The inlet and outlet use the staror helical method so that the suction and displacement sides are cut to a helical shape,and the triangle suction and discharge port formed a straight line of the rotor top is to be opened gradually.Therefore,this kind of roots blower has lower noise and vibration level.
3.Safety And Environmental Protection:The new-style structure design avoids lubricating oil flowing into blower casing,which ensures the blower is oil free.Thus the transported air flow is absolutely clean.
4.Long Service Life And Convenient Maintenance Management:The special bearing and oil seal used in the roots blower,not only ensures the long-life of product but also provides convenience for maintenance.
5.High-performance:The shaft is pressed into impeller ,and the space between impellers and casing is very small ,which ensures the performance of the roots blower.
This product is normally applied for air transportation ,however it can be customized to transport coal gas as well as other special gas.Please note your using purpose when ordering.
Product Feature
1. Air flow and pressure can be customized
2. Stable air flow and less pressure variation
3. Clean air not with oil moist
4. Construction simple and easy maintenance
5. Bearing are all lubricated by oil moist
6. Long service life
Blower Structure Diagram
No. Name Material Q' ty No. Name Material Q' ty 1 Casting HT200 1 14 Z sealing ring Nitrile rubber 1 2 Lobe HT200 2 15 Gear 35CrM 2 3 Drive shaft 45Cr 1 16 Gear lock washer Q235 2 4 Driven shaft 45Cr 1 17 Gear lock nut SS400 2 5 Drive side siding HT200 1 18 Gearbox HT200 1 6 Gear side siding HT200 1 19 Sleeve 45 1 7 Drive bearing NSK or RENBEN 2 20 End cover Q235 2 8 Driven bearing NSK or RENBEN 2 21 Pin 45 1 9 Sealing ring Nitrile rubber 2 22 Plug 35 1 10 Sealing ring Nitrile rubber 2 23 Oil gauge 1 11 Bearing sleeve 45# 4 24 Vent 1 12 Bearing cover HT200 1 25 Grease nipple C3605 2 13 Bearing cover HT200 1 26 Gearbox seals Barley paper 2
Manufacture Technique
Project Case
Certificate
FAQ
1. What's the information should I provide when inquiry?
A: Air capacity
B: Pressure
C: Application
D: Use environment(Temperature, atmospheric pressure)
E: Voltage, frequency, number of phases and speed of motor
Or other specials you give us will be more appreciated.
2. What is your warranty?
Our warranty is 12 months after received the roots blower. During the warranty period, replace the damaged parts for free of charge. Out warranty period, to provide timely, high-quality technical services and price concessions spare parts to ensure continuous safe and high-quality equipment operation.
3. How long is the service life of roots blower?
In normal use environment A- Service life of blower is more than 10 years.
B- Service life of Impeller is more than 60, 000 hours.
C- Service life of bearing is more than 50, 000 hours.
D- Service life of gear is more than 60, 000 hours.
4. What is your terms of packing?
A: Generally, blowers and silencers below 200mm diameter shall be packed in Fumigation Free Plywood Cases, main blowers above 200mm diameter shall be packed in iron pallets, and silencers shall be packed in Fumigation Free Plywood Case. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.
5. How does your factory control product quality?
We have quality inspection department. Before sending out product, we check each product. If there is quality problem, we will produce new one.
6. What are your terms of payment?
1. TT 50% AS THE ADVANCE PAYMENT AND TT 50% AFTER INSPECTION BEFORE SHIPPING.
2.100% IRREVOCABLE L/C AT STGHT.
Product Categories : Roots Blower > Roots Blower For Sewage Treatment Industry