POLYKEN Anti corrosion pipe wrapping tape 0.38mm*50mm*30m

Description

The POLYKEN^® Anticorrosion Pipe Wrap Tape is a multilayer system used for the protection of steel

pipelines. POLYKEN^® 1019,1027 Liquid Adhesives can be used as primers for this system. In addition to

serving as primers, these liquid adhesives themselves represent an anticorrosion layer and provide a uniformly

smooth contact surface to promote high adhesion of the coating system to the pipe. They are designed for

machine or brush application and formulated with stress-corrosion cracking inhibitors. The Anti-Corrosion layer

POLYKEN^® Pe Wrap Tape is engineered to assure a high bond to the primed surface with excellent

conformability characteristics. The mechanical protection layer POLYKEN^® 955 Cold Applied Wrap Tape

achieves a complete bond to the POLYKEN^® 980 inner layer, providing maximum handling and in-service

protection for the coating system. The adhesives in these and all POLYKEN^®Pipe Outer Wrapping Tape

systems contain proven anti-microbial additives. The POLYKEN^® Pipeline Outer Wrap Tape can also be

used for ductile iron pipes, in this case the use of POLYKEN^® 1027 primer is recommended.

Features:
1) The specification of the tape consists of two layers, adhesive and film
2) Inner layer: butyl rubber
3) Outer layer: polyethylene
4) Thickness: 0.380 - 1.27mm
5) Width: 50mm, 75mm, 100mm, 150mm, 230mm, 300mm
6) Length: 30 - 300m

Product Properties	Test method	Typical Value
		POLYKEN980-15	POLYKEN980-20	POLYKEN980-25	POLYKEN980-30
Total Thickness		15mil(0.381mm)	20mil(0.508mm)	25mil(0.635mm)	30mil(0.762mm)
Backing of PE film		9 mils(0.229 mm)	12mil(0.305mm)	13mil(0.330mm)	10mil(0.254mm)
Butyl Rubber Adhesive		6 mils(0.152 mm)	8mil(0.203mm)	12mil(0.305mm)	20mil(0.508mm)
Tensile Strength	ASTM D1000	40 N/cm	55 N/cm	62 N/cm	70 N/cm
Elongation	ASTM D1000	300%	330%	350%	400%
Peel Adhesion to Primed Steel	ASTM D1000	24.5 N/cm	25 N/cm	26.5 N/cm	30 N/cm
Water Vapor Transmission Rate	ASTM E 96	0.10g/m2	0.10g/m2	0.09g/m2	0.08g/m2
Water absorption after 1 day,At+23℃	ASTM D570	0.10%	0.10%	0. 08%	0. 06%
Volume Resistivity	ASTM D 257	2.0 x 1015 ohm.cm	2.5 x 1015 ohm.cm	2.5 x 1015 ohm.cm	2.5 x 1015 ohm.cm
Dielectric Strength	ASTM D149	30 kV	35 kV	42kv	43kv

Contact us if you need more details on Anti Corrosion Pipe Wrapping Tape. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Corrosion Pipe Wrapping Tape、POLYKEN Wrapping Tape. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Polyken Pipe Coating System > Polyken 980 (Inner Wrap)